Traditional processing units are welding. They are irreplaceable in many preliminary steps of manufacturing the finished product. With the welding done in metal cutting and other solids and their docking. A variety of technologies and ways of doing welding, welding in various media, and other features allow them to connect absolutely any metal, including a mixed bag. Welding can be carried out as standard products, and feature songs from the metal. Turning and milling are processes of machining the outer and inner surfaces of the product, such as threading, and others. To broaden your perception, visit RBH Group.
Modern machines are allowed to perform several types of lathes and milling operations in one setup details and perform a series of different operations simultaneously, which significantly reduces time to creating a final product. Metal bending is applied when necessary to create a seamless (seamless) detail, since the seam – it's the stress concentrator products and therefore it is a weak part. Most Active bending the metal to produce critical parts that are manufactured with a high safety margin, such as pipelines for oil and gas. Laser cutting technology is revolutionary in the treatment of metal. Machines performing laser cutting are highly accurate, and employed in its implementation capacity of the metal so small that additional treatment of the cut is not needed. In addition, by concentrating the main effect of cutting the tip of the laser beam, laser cutting metal almost no heat, which prevents its deformation. Machine tools for laser cutting take up very little space in the shop, about 3 1.5 meters and ensure cutting accuracy with coverage of 0.05 mm.
Waterjet cutting is mainly used for materials not of metal – stone and porcelain, plastic, glass and others, as well as for large sheets thickness when utrudneny other methods of treatment. In the implementation of a waterjet cut surface water is pumped nonstop, which excludes heating device and its deformation, and ensures perfect flat and smooth to the touch section. In addition, in waterjet cutting is no separation of dust and gases, providing safe working conditions and safety of all the features of the original material. This type of cutting materials ensures greater accuracy of cutting and insufficient level of material consumption at the expense of a small slice thickness. At the final moment of the design and manufacture of products for sustainable use of the protective coating of powder coating products. Before performing the procedure, the powder coating parts certainly degreased, washed and dried. The applied powder paint coating polymer has both a decorative and protective functions. The positive aspects of this technology are: high corrosion resistance, shock-proof and cost-effective, since powder coating is applied only in one layer.